Miniature Deck Chair (1:10 Scale)

Description

Miniature Deck Chair (1:10 Scale) Bring a touch of summer to your desk or diorama with this realistic 1:10 scale miniature deck chair. It is designed to be a quick and satisfying project that combines 3D printing with common craft materials for a high-quality finish. Materials Needed To complete this project, you will need: 3D Printed Parts (Files included) Short piece of 1.75mm Filament (To be used as hinge pins) 20mm wide Ribbon (Choose your favorite color or pattern!) 1.8mm Drill Bit (To clean up the holes for smooth movement) Double-sided Carpet Tape (Recommended for the strongest bond between fabric and plastic) Scissors Assembly Instructions Step 1: Printing Print all the components. Standard settings (0.2mm layer height) work perfectly. For the best look, consider using a high-quality PLA or PETG. Step 2: Preparing the Holes Using a 1.8mm drill bit, carefully clean out the pre-designed holes in the frame. This ensures that the filament pins will fit snugly but allow the chair to fold smoothly. Step 3: Creating the Hinges Align the frame parts and slide a small piece of 1.75mm filament through the holes. Once the parts are connected, trim the excess filament flush with the frame. You can use a drop of glue or a warm metal surface to slightly mushroom the ends if you want a permanent lock. Step 4: Attaching the Seat Cut a piece of the 20mm ribbon (start with approximately 7cm, but you can adjust based on how much "sag" you want the chair to have). Apply double-sided…