Feed the Frog - Perfetti

Description

A target toy designed for solo or group play, the concept is to successfully hit insects into the frog’s mouth. A shot is considered successful when the frog closes its mouth and eats the insect. It’s an assembly model with a simple mechanism that reacts when the frog’s palate receives a precise impact, causing the mouth to close.By purchasing this model, you do not have the right to sell or distribute any digital files or printed models. If you would like to sell the prints, join me on patreon.com/Perfetti to get commercial license and access to exclusive designs!Printer: Creality LD-002R LCD Resin: Creality water washable resin plus Slicer software: Chitubox basic Printing parameters: Layer Height 0.05mm Bottom Layer Count 5 Exposure Time 6.5s Bottom exposure time: 25s Rest time before lift 1s Rest time after lift 0s Rest time after retract 1,5s Bottom Lift Distance 1,5mm + 4,5mm Lifting Distance 1,5mm + 4,5mm Bottom retract distance 5mm + 1mm Retract distance 5mm + 1mm Bottom Lift Speed 65mm/min & 150mm/min Lifting Speed 65 mm/min & 150mm/min Bottom retract Speed 240mm/min & 150mm/min Retract speed 240mm/min & 150mm/min