One Piece - Crocodile Hook

Description

This model is designed for Corcodile cosplay from One Piece anime/manga series. It is cut into 3 parts to fit in a printer with a platform size of 200mm x 200mm x 200mm. There is a picture with parts labeled to their file names in the preview section which you can refer to. I include a combined version as well just in case you need it. Part 1 has a built-in handle which your hand can be hold on when insert into the parts. I also include an alternative version without the handle if you think you want to install your own handle at the other position. The cut out on part 1 to put in the hand is around 80mm. You can slightly enlarge it using a heatgun during post printing process or scale up the parts in slicer. If you need different size, you can also commission me for the modification. There are built-in peg made on the parts as a guide to install the corresponding parts. If supports are applied to them, remove thoroughly to ensure a smoother installation process. For scaling, please use the same scale for all the parts and pieces. Cheers and Happy Printing!