Window Lock / Cierre Ventana Corredera by Raphael

Description

This is a typical window lock. It works brilliantly and is very stable. I printed the white part with ASA, the black button and the hook I printed in PETG. To be able to print the white housing correctly, you first need the base, which prints separately. Only then do you print the whole white housing. The printing of the housing must be stopped so that the base can be placed inside. Then you print the last layers on top and seal the base. This means you don't need a support and you still get a great print. For the mechanism to work properly, you need the following parts: 1x nut M 41x screw with countersunk head, M4 x 12mm1x spring: outer diameter: 5mm, length: 25mm, wire diameter: 0.5mm Please refer to the pictures for assembly instructions. In order for the window lock to fit into the opening, it must be completely assembled, but the hook must be loose and not tightened, otherwise it will not fit. Then the position of the hook can be adjusted and the screw can be tightened. Edit: I have reworked the following parts so that the knob does not jam. This could happen in an earlier version: -bolt-button-hook ----------------------------------- Este es un típico cierre de ventana. Funciona de maravilla y es muy estable. La parte blanca la imprimí con ASA, el botón negro y el gancho lo imprimí en PETG. Para poder imprimir correctamente la carcasa blanca, primero necesitas la base, que se imprime por separado. Sólo entonces se imprime toda la carcasa blanca. La impresión de la…