THOR UAV/FPV
- 12 views
This model is hosted on Cults3D. Files, images and license details belong to the original creator.
View on Cults3D ↗Description
BIG size uav Sinle motor Wingspan: 1.4 m Length: 0.79 m Wing area: 0.25 m² Fillament: around 900g PETG Max Speed: around 160kmh Recommended takeoff weight: 2kg With a big battery you can get over 90min flightime! You need: Printer with build volume of at least 200×200×200 mm Carbon fiber tube: 8 mm × 1000 mm – 2 pcs Self-tapping screws M3×20 – 28 pcs Self-tapping screws M3×8 – 7 pcs Heat-set threaded inserts M3×4.2×5 mm – 2 pcs Servo wire extensions: 150 mm – 2 pcs (for wing servos) 300 mm – 2 pcs (for rudder/vertical stabilizer servos) I used following: Motor: BrotherHobby Tornado T5 640–900 KV ESC: 50+A Servos: EMAX ES08MA II or similar – 4 pcs Flight Controller: SpeedyBee F405 Wing GPS Module: BN-220 Camera: DJI O3 battery: 6S2P–6S3P 21700 13×7 Sunnysky propeller Use same or similar parts
About this model
THOR UAV/FPV is a free 3D model in the Other category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
