Tire grinder, tire truer, 1/24-1/28 Kyosho Mini-Z, MiniZ, GLR, GL Racing, Atomic, Wltoys

Description

Tire grinder for 1/24-1/28 Kyosho Mini-Z, MiniZ, GLR, GL Racing, Atomic, Wltoys For sanding sponge rubber tires/foam tires/rubber tires. Both VA shafts are mounted on ball bearings Optionally with speed control 12V -24V, power supply unit or 3S / 4S battery can be connected, without speed control max. 12V is recommended The left-hand drawer takes up most of the grinding. The right-hand drawer has space for the rim tensioning device and the spare drive belt The rim clamping device is for RWD rims from Mini-Z, the shaft has a diameter of 3 mm Two adjustment screws for setting the grinding depth so that all tires are ground to the desired tire diameter 17 x STL files 1 x circuit diagram 1 x parts list (motor, bearings... etc) 1 x 3D parts list with print settings 1 x Assembly instructions Tire Truer machine for 1/24-1/28 Kyosho Mini-Z, MiniZ, GLR, GL Racing, Atomic, Wltoys For sanding sponge rubber tires/foam tires/rubber tires. Both VA shafts are mounted on ball bearings Optionally with speed control 12V -24V, power supply unit or 3S / 4S battery can be connected, without speed control max. 12V is recommended The left-hand drawer collects most of the sanding. In the right-hand drawer there is space for the rim clamping fixture and spare drive belt The rim fixture is for RWD rims from Mini-Z, the shaft has a diameter of 3 mm Two adjusting screws to set the grinding depth so that all tires are ground to the desired tire diameter 17 x STL files 1 x circuit diagram 1 x parts list…