Vintage Lens Rehousing NIKON nikkor 50mm F1.4 AI-S Upgrade Ver1.01

Description

I found that the Vintage lens re-housing, made of PLA filament material, was slightly deformed with temperature changes and had defects that were not considered in the design. In particular, as the temperature rises, the correct coupling is loosened, so that the control unit is loosened or the part requiring fixing is easily peeled off. Some designs have been added/changed to compensate for these defects and make them more stable. In addition to fixing this design flaw, I also tried to upgrade to a slightly better design by considering a few additional features. Upgrade details (Nikon 50mm f/1.4 AI-S) Ver1.01 Fixing the housing with M4 grub screws Wide window design for easy checking of lens settings Simplification by reducing the number of housing parts The changed parts are the focus gear part, the aperture gear part, and as a whole, they are the same specifications as the previous rehousing version, so it is possible to selectively replace only some parts.(The front part of the lens re-housing is unchanged and is the same as the front part of the previous version) See the link below for more information and Old version file https://surplusperson.tistory.com/688