Mold for diecast military tire 10 Scale 1 to 10 and 1 to 14 and 1 to 25

Description

The mold is intended for the tire manufacture from silicone or similar flexible material in scale 1:10, 1:14, 1:25. It consists of 2 parts: top and bottom part. Each part can be 3D printed without supports. Mold dimensions 1:10: - diameter – 132 mm - height – 31 mm Tire dimensions 1:10: - outer diameter – 92 mm - overall width – 21 mm - inner diameter – 50 mm Mold dimensions 1:14: - diameter – 106 mm - height – 25 mm Tire dimensions 1:14: - outer diameter – 66 mm - overall width – 15 mm - inner diameter – 35.7 mm Mold dimensions 1:25: - diameter – 77 mm - height – 18.5 mm Tire dimensions 1:25: - outer diameter – 37 mm - overall width – 8.5 mm - inner diameter – 20 mm If you want a different wheel size, simply scale the mold. The bottom mold part has 5 special bosses and Top mold part has 5 special holes to guide mold parts in the closed state. Also, there are 4 slots for better opening with a screwdriver or similar instrument. In the Top mold part are 4 small holes for material injection. Both mold parts have 4 holes with diameter 6 mm for bolting it in closed state. Note! Only the mold! This is not a tire!