Retro Clock

Description

CLOCKSXCULTS Retro table clock Retro are always cool! And now you can print them on your 3D printer! A replica of the legendary watch from the Oryol watch factory "Yantar" - a classic of the USSR on your table. The company logo is included =) Printed without supports. I used PLA and my Anicubic Kobra 2 Neo. To simplify the assembly, there is a special ledge at the bottom - the parts will not turn during operation. The dial can be printed in two colors - read the instructions for your printer. All parts fit together easily and are ready for assembly immediately after printing! The hands are put on quite tightly! If you have problems with this - increase the scale in the X and Y planes. Fake glass But the most interesting thing is that the set includes a mold for making glass from a PET sheet! Heat a piece of PET sheet and place it between the molds. Then squeeze hard. ATTENTION!!! This action requires experience! You are interacting with heat! To perform the molding, use a PET sheet no thicker than 0.7 mm. You can heat it with a heat gun or put it in the oven. BUT DON'T OVERHEAT IT! The PET sheet should become soft and start to behave like rubber - this is when you need to mold it. If the workpiece is not deformed enough, just repeat the process again. BE CAREFUL WITH A HOT PET SHEET! HOW TO ASSEMBLE THE CLOCK? Assemble…