Nozzle cleaner stand. - Uran109

Description

A simple modification of the rubber nozzle cleaner holder. Now, thanks to it, you can install any single-sided or double-sided plate on the table.-----------Recommended printing parameters: 1. layer height - 0.15 mm 2. PETG filament 3. it is advisable to make a border around the model for better adhesion----------Mounting the holder is not difficult. First, you need to carefully tear off the rubber from the original plate and glue it with double-sided tape into the upper groove on the model. Then screw it with the rear screws of the table. After all the manipulations, it is advisable to calibrate the table.