OG Flipster Print-In-Place Hybrid - Magnetic Fidget - Haptic Hobo Nickel by MZMDigitalDesign

Description

This New OG Flipster design uses the same magnet pattern as the other OG Flipsters but is a Print-In-Place Hybrid, that means no press. The magnets are embedded inside the halves while the printer is paused, just like the kickflip decks. If you have not printed a KickFlip deck yet and you are wondering about magnet placement please check out this post https://www.patreon.com/posts/kickflip-magnet-121228896?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link For the best functioning fidgets I cannot stress enough to order the same magnets I use.... (2) 8x3mm magnets in each hole -https://a.co/d/eKWQ0rw All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mm layer height with a 20% infill. I use the 4 Color AMS system to print the models in color. I used the following filaments to print the hobo nickels shown in my photo... Filaments: Dark Silver Main Color - AMOLEN Silver / Black SILK PLA - https://a.co/d/1ldLvHr Light Silver for Indian and Buffalo - CC3D Silver Silk PLA - https://a.co/d/0OC2QrU Black for Buffalo Accents - Kingroon Black PLA - https://a.co/d/fIkUMo2 Thanks again for your support and please let me know if you have any questions. Thank you! Mike These magnets and magnetic fidgets are very strong and create pinch hazards. They are not intended for Children. DISCLAIMER: Not a toy for children. Contains small parts and strong magnets. Magnets can be dangerous…