Skeleton Warrior - JustinCase

Description

A menacing skeletal warrior clad in jagged armor, wielding a massive sword and shield. The figure stands in a battle-ready stance atop a textured base, exuding a dark and intimidating presence.Creality Ender 3 V3FDM PrinterLayer Height: 0.08–0.12 mm (fine detail for minis)Nozzle: 0.2–0.4 mm (smaller is better for detail)Infill: 15–20% (higher if you want durability)Perimeters/Walls: 3–4 walls for strengthSupports: TreePrint Speed: 30–40 mm/s for accuracyMaterial: PLA for easy printing, PETG/ABS for more strengthRESIN PRINTER (Best for miniatures)Layer Height: 0.02–0.05 mm (20–50 microns) for best detailExposure Time: Depends on resin & printer, usually 2–3s per layerBottom Layers: 6–8 with longer exposure (30–50s each) for adhesionSupports: Use medium supports under arms, sword tip, and shield edges (to prevent warping/failure)Orientation: Tilt model 30–45° to reduce suction forces and improve detailWash & Cure: IPA wash + proper UV cure for durability✅ Resin will capture the armor, skull, and texture detail perfectly.