Anet A8 Hotbed Cable Guide
- 11 views
This model is hosted on Thingiverse. Files, images and license details belong to the original creator.
View on Thingiverse ↗Description
This is a cable strain guide for an Anet A8 hotbed cable.My plug was beginning to burn out as the connector plug was not a tight fit, and so I soldered them directly to the hotbed. I made this cable guide to stop solder movement. It mounts to the H aluminium frame underneath the hotbed, and to make this work I had to rotate the hotbed left 90 degrees and mounted it just past the bearing.The cables are a tight fit, but tightening the cable management spiral allowed it to slip through the gap. If its too loose for your wires then you can use a small cable tie to tighten further.The aluminium H plate was 3mm and this piece was a tight fit there as well printed with ABS.
About this model
Anet A8 Hotbed Cable Guide is a free 3D model in the Other category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
