PLA_Test
- 11 views
This model is hosted on Cults3D. Files, images and license details belong to the original creator.
View on Cults3D ↗Description
SUPPORTS Only add supports where indicated in the photo. UPDATES +Thinner towers +Better angles TESTS INCLUDED Stringing Clearance Carved Texts Bridging Curvature Layers Overhang Angles External Supports Internal Supports Angled Supports Scaling Layer Quality Adhesion HOW TO USE 1) Align the model as the Y axis labeled at the bottom of the part. 2) Add support structure to only the "letter D" shaped overhang. 3) Start to print and observe. If anything goes wrong, stop the print asap. 4) Clear the support and separate the "screw-shaped pins" by breaking their tips. 5) Examine each side of the part and perform the clearance test by inserting the separated "screw-shaped pins" into the vertical and horizontal holes.
About this model
PLA_Test is a free 3D model in the Other category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
