Gravity Utility Blade Multi-Tool

Description

This is my spin on a gravity knife that also functions as a multi-tool. The tools include; -Ruler on top handle, both metric and imperial measurements -Line Cutter as part of bottom handle, for cutting lines or stripping wires -Precision Bit Driver on front end of top handle, for use with any 4mm precision hex bit -Standard Bit Driver on rear end of top handle, for use with any standard hex bit -Gravity Utility Blade, for use with standard safety utility blades Assembly: The utility blade is replaceable, and is held in place on the blade slide with two 8mm M3 screws (M38) with accompanying M3 nuts. The blade slide is then inserted into the bottom handle from the rear. USE EXTREME CAUTION when inserting the blade slide, there will be resistance that will require slight force to overcome, resulting in the blade slide shooting through the length of the bottom handle (as shown in photos). Keep all body parts clear of the blade, during this step and at all times. Glue the Pivot Screw Cap onto the head of a 20mm M3 screw (M320). The opening and closing action of the Gravity Utility Blade Multi-Tool will result in the pivot screw working itself loose, and the Pivot Screw Cap will allow for manual tension adjustment, without the need for any tools. Place the top handle on top of the bottom handle, making sure the holes for the pivot screw are aligned. Hold an M3 nut in the hex hole on the right side of the top handle, as you screw the M3*20 screw into the hole on the opposite side…