Claymore sword

Description

For assembly, you will need a pipe or a stud (rather heavy but better glued) with a diameter of 10 mm and epoxy glue. You can also adjust the length of the sword by putting different different scale values on the parts 3,4,5,6, you also need to print both parts under number 2. The length of the pipe is 135cm if you did not change anything, also the total length of the sword will be 146cm. It took me 18 hours to print and was printed once on a large 3D printer. If the print area of your printer is less than 200/300/300, then you need to cut the parts yourself, I also attach the whole model.