USB Microscope Holder

Description

Holder for USB microscope. Features: * the wheel for adjusting the height is at the bottom, pressed by two nuts and two bearings, which makes the process of moving along the height easy; * the microscope mount allows you to deflect it, which also expands the possibilities of use. Made several mounting options: 1) For screwing to the base (printed or wooden) - Bottom.stl 2) On the magnetic holder: 2.1) Rectangular magnets 20x10x5 ( https://aliexpress.com/item/1005001832581739.html ) - Bottom-magnet (20x10x5).stl 2.2) Round magnets 20x5 ( https://aliexpress.com/item/1005001832538773.html ) - Bottom-magnet (20x5).stl Additional accessories: 1) Shaft diameter 8mm, length 200-250mm - 2 pcs. 2) Stud screw M8, length 10mm less than the length of the shafts. 3) Nut М8 - 2 pcs. 4) Bearings 688zz - 2 pcs. 5) Screw M3x10 - 12 pcs. 6) Screw M3x20 - 2 pcs. 7) Nut M3 - 14 pcs. 8) Screw M4x20 - 1 pc. 9) Nut M4 - 1 pc. 10) Sleeve 8x11x30 ( https://aliexpress.com/item/32476367665.html ) - 2 pc. Source: https://www.tinkercad.com/things/dqGJjhK0FIS Soft = Microspin2 MP Digital Microscope Capture Software(44114) - https://www.celestron.com/pages/drivers-and-software USB Microscope = https://www.aliexpress.com/item/1005004412410690.html Support Ukraine, please make a donation to the Armed Forces of Ukraine - https://bank.gov.ua/en/about/support-the-armed-forces ============================================ Держатель для USB микроскопа. Особенности: * колесо для регулировки высоты находится снизу…