Fallout themed Wall Clock with backlighting

Description

A cool fallout themed wall clock for your home! The design is inspired by the fallout games and shows a mountain with a vault door in the foreground and a nuclear explosion in the background. The explosion can be backlit with LEDs. There is a cavity in the background so allow for light to shine through. A detailed guide on how to assemble the clock and to do the wiring can be found in this blog post (https://pyroka3d.de/2023/12/29/creating-a-fallout-clock/): I used this clock work (https://amzn.to/3tyJVcw), but any clockwork with a 8mm shaft in diameter and at least 3.4mm in height works. Size: 210.1 x 210.1 x 24.1 mm Your buildplate should be at least 22cm in length and width. First of all there are two variants for printing: With a multicolor printer in the same layer By printing the color in different layer heights for both variants the following files exist: Files: - Explosion - Mini-Nuke - Mountain - RedRocket - Clock Background - Clock Frame - LED Frame the blog post as PDF Files for multicolor print are importat as object with multiple parts. Then the parts are colored seperatly. The color for every part filament change is given in the filename. The inner ring (seen in neon green) can be printed as seperate object and then glued in. Or printed together with the fame as one object with multiple parts. These are 2 seperate files, with and without tolerance. You can print it without the extras for LED construction if you are not interested in a backlight. Check out this…