APPLEPROOF // FLEXANGLE // IPHONE (11-15) (see details) Horizontal

Description

This is a horizontal mount for Iphones (supported models: see below). The mount has a standard GoPro mount for attachment and can be used flexibly. For people who are not afraid of their Iphones, this is just right! Donwload contains files for iphones with no case. Also added a version ("...+case") that increases the size to fit most cases (+5mm width & +3mm thickness). Please note that the Iphone is susceptible to wobbling due to its weight and shape (it is just like a sail or wall). It may be useful to switch off the stabilization. If you have problems with this, it may be due to the choice of TPU, it should be rather hard, and the GoPro mount on the frame (many are designed far too thin, have a look at my FLEXANGLE (https://cults3d.com/en/design-collections/yannikfpv/bandoproof-flexangle) mounts, they are built to be as robust as possible). Basically, it is not suitable for freestyle flying, but for cinematic shots. In combination with normal universal mounts, the mount can be mounted on FPV drones. Take a look here for my Bandoproof Flexangle mounts - they are extra robust and designed to prevent wobbling. (https://cults3d.com/en/design-collections/yannikfpv/bandoproof-flexangle) *Disclaimer: *I am not responsible for any damage. Please test yourself if everything is tight. The moutn MUST be printed out of TPU. Note the print orientation (pictures above). Mounting: Slide the Iphone sideways into the mount (lenses on the left). Then use a Velcro strap (20mm wide) and pull…