Ghost In The Shell Seburo M5 Pistol

Description

Ghost In The Shell Seburo M5 Pistol This is a set of 3D files to print your own Seburo M5 pistol as seen in Ghost In The Shell and Appleseed anime. This is Duplex Designs' take on this popular pistol. With this one we designed the weapon with quite a few parts and tried to combine the on screen appearance with a semi-realistic mechanical operation and assembly. So this is in the classic anime style but recreated as if it were actualy machined and manufactured. Whilst not being viably operational, or contain all internal mechanisms, the following features allow for some movement: Slide will pull back. Trigger will move - if you fit a 6mmX10mm spring. The hammer will pull back - if you fit a 6mmX8mm spring. Magazine can be loaded with dummy 5.45x18 rounds. The pistol mostly locks together using its own parts but there are four parts that will require some glue. The ejector could do with a spot of glue to secure it to the frame. The magazine base plate requires gluing to the magazine tube. The recoil rod should be glued into the locking block. Optionally glue the grip to secure it to the frame, although with the magazine release slid into place and the magazine present it is reasonably secure. See Build Instructions (https://duplexdesigns.co.uk/assets/files/Ghost-InTheShellSeburoM5.pdf) History The Seburo M5 is a compact, semi‑automatic, SA/DA sidearm used by Section 9 in Ghost in the Shell: Stand Alone Complex, known for its rotating‑barrel action, 3.5‑inch barrel, and sleek…