Modified Prusa MK3 R3 X ends

Description

Im in the process of printing the parts for a "build it from scratch" Prusa clone, with a bag of cheap chinese parts - But the leadnut i have doesnt fit for the original Prusa i3 MK3 Revision 3 "xidler" and "xmotor" parts - Prusas originals is made for a LeadNut with an outher diameter of 14 mm, but the LeadNut i have is just 10,2 mm Thanks to Josef Prusas open source creations, i can publish these x ends, which is the latest revision of the parts for the Prusa i3 MK3 printer! Josef recommend the parts printed in PETG - If you print the in PLA it will probably break! Revision 1: I had made them a little to small for the LeadNut, så I have expanded the holes a little - 0,4 mm in diameter. Its still at the small side, so a little sanding might be neccessary, but i like a tight fit! The Gcodes are created on Simplify3D: Bed temp: 50 degrees and extruder 242 degrees, which fits my PETG! The original parts is from this site: https://www.prusa3d.com/prusa-i3-printable-parts/