EUC Adjustable Stand

Description

EUC Adjustable Stand Simple but effective adjustable EUC stand with sliding rails. CURRENTLY TESTED AND CONFIRMED TO WORK WITH THE MTEN4, T4 AND SHERMAN V3 Min. width : 120mm Max. width : 220mm Height : 180mm To assemble the stand you will need : - 8 M4x16 screws and nuts Insert 4 nuts in the outside extremities of the rails (see small rectangle). You might need pliers to push them in, it's a tight fit Assemble the rails by using 2 screws in 2 of the 3 holes on the outside rail. Put 2 nuts into the recessed channel on the inside rail and thread the screws into the nut. This will act as the slider mechanism, so don't tighten it too much before sliding it into it's final position Thread 2 screws into the ''outside'' holes of on of the sides and the 2 others into the ''inside'' holes of the other side Assemble the rails and side with the screws already threaded into the sides Tighten everything firmly when you have adjusted the stand into it's desired position