Cable grommets

Description

Table cable grommets. Organize all the cables on the desk or work table and do not disturb can be difficult if the table does not have this type of cable grommets. In a simple way with a drill, a circular drill bit and two simple printed pieces you can at once organize all the cables. Choose your STL by taking your measurement in millimeters or inches of the hole you want to make and the thickness of the board you have. You can also ask me for the measurement. Send me a message with the specific measurement you need, I will publish it and you can download it. pass40mmD16mmL and cov40mmD16mmL For drilling with 40mm and 16mm board thickness. Equivalent to 1-9/16" diameter and 5/8" board thickness. STL: pass40mmD19mmL and cov40mmD19mmL For drilling with 40mm and 19mm board thickness. Equivalent to 1-9/16" diameter and 3/4" board thickness. STL: pass40mmD25mmL and cov40mmD25mmL For drilling with 40mm and 25mm board thickness. Equivalent to 1-9/16" diameter and 1" board thickness. pass40mmD30mmL and cov40mmD30mmL For drilling with 40mm and 30mm board thickness. Equivalent to 1-9/16" diameter and 1-3/16" board thickness. pass51mmD16mmL and cov51mmD16mmL For drilling with 51mm and 16mm board thickness. Equivalent to 2" diameter and 5/8" board thickness. pass51mmD19mmL and cov51mmD19mmL For drilling with 51mm and 19mm board thickness. Equivalent to 2" diameter and 3/4" board thickness. pass51mmD25mmL and cov51mmD25mmL For drilling with 51mm and 25mm board thickness. Equivalent to 2"…