Holy Martian Fire Engine

Description

I have a free version at: https://www.thingiverse.com/thing:4928551 Please buy here so I can get monies. This is a radio controlled robot and a tribute to Warhammer 40k's Onager Dunecrawler I was inspired by RegisHsu's Quadruped, manic-3d-print's Ex-Spidey and Alex Korvin's Creations. The pilot figure is a mod on a model designed by ErikTheHeretek's The large parts, Light Gray and Red were printer in PLA using Cura's 4.8 default configs for Ender 3 High Res profile. I used 20% infill, Rafts and Tree Supports. I tried to otimize the part's designs to minimize the need for supports so there will be parts that need no support. The innards and electronics can be directly copied from Alex's Walking Volkswagen Bus. I used MG90S servos. This is a work in progress, I will upload a STEP file and the Electronic Schematics soo. You will need to print one of each part except for the the following that need special quantities as described: DCRAWCoxaTankB: 2 + (2 mirror versions) DCRAWFemurTankBCenterHub: 2 + (2 mirror versions) DCRAWDome2.STL: 3 DCRAWHeadHeadlight.STL: 2 DCRAWTibiaAcabamento2: 8 (optional) DCRAWTibiaAcabamento4: 4 (optional) DCRAWTibiaAcabamento3: 4 (optional) DCRAWPiston2.STL: 4 DCRAWFemurTankBTopPlate: 2 + (2 mirror versions) DCRAWPiston1.STL: 4 DCRAWTibiaTankBShield2: 4 DCRAWTibiaTankBFoot: 2 + (2 mirror versions) DCRAWFemurTankBSidePlate: 2 + (2 mirror versions) DCRAWHeadExaust.STL: 2 DCRAWTibiaCable: 4 (optional) DCRAWRung1.STL: 4 DCRAWTibiaTankBShieldFull: 2 + (2…