wolfrider - Ozvald-3D

Description

3D model description:3D model inspired by the Wolfrider toy art. 3D model available in 12-inch and 15cm sizes. 3D model divided into parts for gluing. 3D printing settings:Nozzle: 0.4 mm Layer height: 0.2 mm First layer height: 0.2 mm Line width default; 0.42 mm First layer: 0.5 mm Outer wall: 0.42 mm Seam position: Back Staggered iner seams: Yes Seam gap: 10 % Wall loops: 2 Top surface pattern: Monotonic line Top shell layers; 5 Bottom shell layers: 3 Sparse Infill density: 15 % Sparse infill pattern: Grid Sparse infill direction: 45° Solid infill direction: 45° First layer speed: 60 mm/s First layer infill speed: 60 mm/s Outer wall speed: 100 mm/s Inner wall speed: 150 mm/s Slow down for overhangs: Yes Travel speed: 500 mm/s Support: Tree - Oganic Raft: No Skirt: No Brim: No