Proton Pack Accessories

Description

These are some of the greebles and parts that attach to the proton pack shell. Features: The following are modeled with "shelves" which I used as guides for hot glue welds. • Beam Line • Filler Plug • HGA • Ion Arm Print 2x of Injectors Pt. 001 then glue to Injectors Pt. 002. There is a gap designed into the parts so that they can be glued and then filled to blend seams. The Booster Tube has a gap just like the Injectors parts. Pt. 003 is separate for sanding and cleaning then glues into pt. 002. Fastening: hardware: • 1/4-20" x 1" hex bolts • 1/4 washers • 1/4 lock washers • ¼-20 nylon locknuts. The following components I used two-part epoxy and inserted the heads of the hex bolts in: • Beam Line • Filler Plug • HGA • Ion Arm The following components I used two-part epoxy and inserted the nylon locknut: • Injectors Pt. 002 The Booster Tube I tapped and threaded so the bolts would engage from the back of the shell. The PPD has two holes in the back to fit #6 socket head screws and hole in the bottom for a #10 screw. The screw in the bottom is aesthetic.