STC-1000 Temperature Controller Enclosure - 120V US Outlet Mount

Description

STC-1000 Enclosure This is a compact 3D-printable enclosure designed for the STC-1000 temperature controller, with a built-in standard American outlet opening on the side. Features: Two openings on the back: - One for the temperature sensor - One for the power cable Includes 3D-printable cable glands: - One for the temperature sensor - Two options for power cables: a standard 3-prong (6 mm thick) or a flat 2-prong style Cable glands are split with a gap to clamp the cable once the nut is installed. Nut size may vary depending on print tolerance — scale if necessary for a snug fit. The lid slips under the enclosure front and screws down directly into the plastic for a secure closure. Check the included picture for a wiring diagram. All wiring is your responsibility. Ensure proper wiring and do not exceed the STC-1000’s rated current. The outlet can be configured for single-load or dual-load setups; follow your controller and outlet specifications. The STC-1000 can be used for heating, like a 3D printer enclosure with a PTC heater (like in my case with a 200W PTC heater), homebrewing, incubation, etc.