Shooting Target - Creating 3d

Description

Thin shooting target, which can be printed with different colorsfrom the outside to the inside with a 0.2 layer height difference between each ring.Shooting Target 7 parts 6 colors are needed if you want to do it like I did.it is possible to do it with 2,3,4,5 colors too if you use black and white alternately for example.Of course you can pause and change color yourself if you want manually.It prints from the outside in so when the first 2-3 outer rings are made you can change color to the inner rings.the inner ring are therefore 0.2 thicker and so on, so it writes over with the right color.the model is human size but can of course be scaled down. k1 max and k2 plus can handle the full size.If you have problems with the first layer you can add 0.2 extra at the back to avoid light passing through.However I had no problems with the first layer so it turned out a nice surface.About 30 minutes print time per full size part.