Druid Gorget

Description

Wearable Neck Armor Fantasy druid-inspired gorget featuring layered collar plates, organic curves, and large beast fang elements for a primal ritual aesthetic. Designed to frame the neck and upper chest with a strong tribal silhouette. 📏 Measuring Instructions For cosplay wear Measure neck circumference at base of neck. Measure shoulder width (tip to tip). Measure collarbone width (front span where gorget rests). Scale main collar piece based on neck circumference. Allow 3–5% extra clearance for padding and comfort. If unsure, print a small collar arc test section before full print. 🖨️ Printing Tips Works well with PLA, PLA+, PETG, PLA-HT, FPLA, and elastomer-based filaments. Recommended layer height: 0.16–0.24 mm (FDM) Infill: 10–15% for lightweight cosplay 20%+ for reinforced convention durability Wall thickness: 3–4 perimeters recommended. 🎨 Finishing & Painting Tips Prime and sand visible surfaces. Base coat collar in dark bronze, aged steel, or stone gray. Paint fangs in bone, ivory, or weathered tusk tones. Apply dark wash in recesses for depth. Dry brush edges for worn ritual look. Seal with matte clear coat for natural finish. ♨️ Fit Adjustments Minor shaping adjustments can be made using a hairdryer or heat gun on low. Heat gradually and reshape gently for improved neck contour fit. 📐 For Action Figures / Miniature Scaling Scale uniformly to match figure neck width. Works well for 1:6, 1:8, and 1:12 fantasy figures. Increase wall thickness proportionally when…