🦴 Skeletal Bra Cups

Description

These Skeletal Bra Cups are a pair of standalone, bone-inspired armor cups designed for dark fantasy, gothic, witch, necromancer, demon, and ritual-style costumes. These are decorative armor cups meant to be glued, strapped, or attached to an existing bra, harness, corset, or costume base. 📏 Measuring Instructions This model is designed to be scaled before printing. Measure your bust width (left or right) and cup height using a soft measuring tape or caliper. Compare those measurements with the model dimensions in your slicer. Scale uniformly or non-uniformly (X/Y/Z) if needed to better match your body shape. Test-print 5 mm cup ring first before printing the full cups. 💡 Tip: These cups are meant to sit on top of fabric, not directly on skin. 🖨️ Printing Instructions Recommended layer height: 0.16–0.2 mm Supports: Yes (organic/tree recommended) Orientation: Front-facing or slightly tilted back Wall thickness: 2–3 perimeters Infill: 10–15% (gyroid or cubic) Recommended materials: PLA / PLA+ PLA-HT FPLA ! PETG Elastomer-based / flexible filaments for softer costume builds 🎨 Finishing & Painting Tips Light sanding on outer surfaces only Prime before painting Works beautifully with: Bone, ivory, ash, obsidian, or metallic paints Dry-brushing to highlight bone texture Washes for aged or cursed effects 🔥 Fit adjustment tip: A hairdryer or heat gun on LOW can be used to gently fine-tune the curve for a better fit.