Shield Volvo EC160 Double E
- 15 views
This model is hosted on Cults3D. Files, images and license details belong to the original creator.
View on Cults3D ↗Description
I am offering a blade for the Volvo EC160 from Double E. The bracket withstands the usual, normal loads without any problems and does not break. The blade is simply pushed into the recess and screwed to the excavator from below. A list of materials is included (controller, rotary joint, motors, screws) The cost is approx. 130€ The electric version still has the rotary controller free at the bottom left. Channel 8 or 9. Printed in PETG with 100% infill. Approx. 175g filament, PLA usually also holds. A 180mm printing plate is sufficient. (Shield diagonal) A hole must be drilled in the excavator for the cables (see photo). I used a JST connector. The excavator has to be completely dismantled to replace the rotating union. ( https://www.youtube.com/watch?v=RaF_k3qlJdA&t=638s ) At the same time, you could install the slewing ring upgrade with the 11 pinion (Wuehlbox)
About this model
Shield Volvo EC160 Double E is a free 3D model in the Other category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
