Ultimate Guard 100+ Boulder Dice storage Insert - RL3DP

Description

This is a Dice Storage insert for Ultimate Guard 100+ Boulders. There are 9 sections that should fit 5 16mm 6 sided dice in each compartment. The gaps at the side of the compartment are to remove the dice in a similar fashion as most home Poker chip storage devices. The middle section is accessed by remove a dice from each side and it should be inserted at 90 degree rotation as shown second picture. This ensures that you can remove the middle tray to gain access to those dice.The middle section of the base is meant to be lower so that the middle insert can still hold 5 16mm 6 sided dice within and not poke out of the top.The lid needs to be printed and used to prevent severe rattling during transit. there are o.5mm clearances between; the insert and the 100+ ultimate guard boulder, the lid and the base, the middle insert and the base and there is a 0.5mm clearance between the dice and the inserts.This is the first ever 3d Design that I made in fusion 360.