The Legend of Zelda: Tears Of The Kingdom Purah Pad cosplay STL files for print

Description

This is a case for the original Nintendo switch console so that it looks like the Purah Pad straight from the game! It fits both the switch and the OLED switch (without grips), they differ slightly in size, mainly in length. The case is made with a small margin in any case, and I glued thin foamiran and thin fabric inside so that the switch case would not be scratched and to cover wires. It is better to take the wires as thin as possible so you can simply run them along the back wall and seal them with fabric. The central case is in one piece, it should fit into a large photopolymer printer entirely, or into a regular FDM printer. The side grips are hollow inside, there are grooves for LEDs and buttons. I printed the side grips with blue transparent resin and filled the lenses above the diodes with liquid masking until the end of painting. But then I still had to paint it with blue-tinted varnish so that it glows blue. You can print transparent right away and then tint the lens with varnish, or print with blue resin. And you can take blue LEDs. I took buttons like these, the groove in the case is 88 mm https://www.amazon.com/Self-Locking-Switches-Through-Tactile-Electronic/dp/B0BN5SR992 I had LED "piranha" with a lens, the groove for them is square 99 mm, so you can use any of the same or smaller or just small SMDs. https://www.amazon.com/Chanzon-Intensity-Lighting-Electronic-Components/dp/B01CBMAJDM?th=1 There is space in the grips to fit a 12v 23A battery in the battery…