Torch (LED Wall mounted)

Description

Always loved the idea of having torches around the house instead of plain boring lights... so decided to make some myself using those flame simulating Led lightbulbs you can get from amazon... And here it is! You will need some stuff from the hardwarestore and since im from Europe, you´ll just have to look locally if there is something simillar I guess. So you will need the following: * one LED Flame Lightbulb (just search on amazone, there are plenty... I`ll recommend a E14 since thats what I used and I dont know if the E27 is to big for this build) * the electronic stuff that goes with the lightbulb (Cabel with switch and so on) * one 30 mm round small table leg (see the picture) * one M10 x 40 mm bold that fits into the tableleg (again see pictures) Print the spikes 4 times, the conectors twice and the assembly is pretty self explanatory, just screw the stuff together, use some glue on the spikes and rings, as well as the connectors for the raven skull and you should be fine... be aware that some pieces may need some sanding, this is not so much a print and play but more like a build that may need some tweeking here and there! Have fun with it!!