G&G LevAR Stock

Description

Stock for the G&G LevAR Unique design approach as alternative to the pretty long original stock. The length can be adjusted by the amount of distance pieces (10mm). The height of the buttplate is adjustable. There are two buttplates included: one minimalized printed version and one which uses the original rubber part. Alternatively I added a rubber pad which should be printed in TPU. This fits also the original stock. You can still use the original cheekrest + fake bullet holder or use the provided clip-on cheekrest. Disassembling works just like before. The bit which covers the charging handle cutout needs to be removed. Then the rail section gets fix just by assembling upper and lower. For one version you need the screws and thread bushings of the original stock to fix it to the rail on the grip (M3x30). The bushings can be pressed out pretty easy. I added another file for the stock where you can use standard M3 nuts instead of the original stock parts (obviously the "Stock Main M3 Nuts" file :-D ). For this you'll need to source the nuts and 2x M3x30 allen screws. Furthermore you need : - 1x M5x25 countersunk head screw + M5 hex nut for the rail+stock - 2x M5x20-60? countersunk head screw + M5 hammerhead / T-slot nuts for the buttplate. The nuts must be for the 20mm profile, not 40mm! Screw length depends on how many distance pieces you want to use. I use two and need 40mm screws - every piece adds 10mm - 1x M5x40 allen screw for the sling Edit 30.11.2025: Rail part…