Irelia Spirit Blossom League of Legends STL files

Description

3D .STL model of Irelia's Spirit Blossom skin, as seen in the game League of Legends. This includes 6 .STL files; some files will need to be printed multiple times. The total length is approximately 100 cm. There are two versions available for the cannon (with and without the blue energy). The parts are suitable for a printer at least 250 mm tall and 200 mm wide; if your printer is smaller, you can cut the model into sections. The two parts can then be glued together. The files include: .PDF files .STL files Recommended post-processing: The parts can be glued together with super glue; I recommend pressing the parts together for 10 seconds and letting them dry for a few minutes to ensure a strong bond. You can also use glue suitable for 3D printing or epoxy glue. Sand your 3D prints with sandpaper, using a primer or filler spray to achieve a smooth surface. Once you’re satisfied with the results, apply a coat of primer as your final layer before painting with acrylics. You can protect your work with satin or gloss varnish. The 3D models are created by me. These files are packaged in .RAR files; you must extract the files correctly to use them. If you have any trouble doing so, please contact me. License information: You may not resell or distribute these files in any way. Not authorized for commercial use. You may not sell 3D prints or casts created using these files, except for a limited (one-time) quantity, such as commissions. Credit must be given at least once when your…