JGAURORA A3S Reference Model

Description

The frame is about the worst it can be due to the inaccurate and flexible joints and inaccurate and flexible sheet metal. I eventually converted this to a VORON Legacy, which required some parts you can get from my modified sourcing guide linked from my Unofficial Assembly Guide: I built a 3D printer from DIY plans (VORON Legacy serial # request by poikilos_) + Assembly Manual on YouTube (link in description).This (JGAURORA A3S V1 Reference Model 1.0) took about 48 hrs. I assume that we must not infringe on JGAURORA's intellectual property by manufacturing clones of the printer. However, I assume you can use it to:Make mods.Re-print or change the included stock-style parts in case they fail or you want to improve them (I made STL files of each)If any stock parts do not have an STL file or they do not fit, please explain the exact problem in a comment, with measurements if possible. See "Print Settings" on this page before printing to try to get it exact!HardwareJGAURORA A3S V1The mainboard says: "MKS Gen L V1.0"The TFT board says: "MKS TFT28 V3.0"There is an unoccupied WiFi port.The serial port is at the bottom middle (and must be disconnected while flashing the mainboard!).MeasurementsThe "Measurements" section and subsections apply to the stock parts provided by the manufacturer or exact equivalents.The blend file uses "left" and "right" to refer to the left and right of the user looking at the front of the 3D printer.The terms "near and far" are used when looking at the…