Magnetic Quick Charger

Description

I designed a magnetic quick charger, mainly for my motorcycle and my car. The Connection allows up to 10A charging current. The LED is just to show that the Connection is good. what you’ll need: Magnetic Connectors: https://s.click.aliexpress.com/e/_op6maEh Choose „10mm 10A 12V“ ————— a 3mm LED - Choose whatever color you like. The cheapest option might be a 50 or 100 pack. I bought these: https://s.click.aliexpress.com/e/_oCF3AMz For the LED you’ll also need a 1K ohm Resistor, otherwise the LED will not work: https://s.click.aliexpress.com/e/_oEiPq5f ————— Some Wires - it’s more practical to use thinner Cables as there is not much space inside the plug. I recommend using 16 AWG Cables as they can withstand 10A. For my use at least I will be mostly charging with 5-8A. https://s.click.aliexpress.com/e/_opSbET7 ————— I also recommend soldering a Fuse between the Battery and the Plug. Such as these: https://s.click.aliexpress.com/e/_olJCABL make sure to choose the 10A Version or these: https://s.click.aliexpress.com/e/_oEuT3tb I also recommend choosing the 16AWG Cable with a 12A fuse as the Magmetic connector can withstand 10A. ————— For the Connection to your Charger / Battery you can use whatever connectors fit the best for you. I recommend these: https://s.click.aliexpress.com/e/_oDPNz5b or these: https://s.click.aliexpress.com/e/_oFVxok5 ————— For the Charger Side you can use XT60 Plugs, which are overpowered for this application but they are my favorite plugs :)…