F-4E 50mm EDF

Description

This is the 50mm F-4E Phantom by Vaughn3D. This model has been painstakingly made to fly well and to be easy to assemble. This is v3 of this model and you now have the option to add a 6mm carbon wing spar. 250mmx250mm print volume required 24HR Print Time 2.5HR Build Time It uses both PLA and LW-PLA-HT; however the entire model can be printed from PLA. This F-4 is customizable with 2 wing options and 2 fuselage options. Xfly 50mm EDF 1800 - 2200 4s lipo 6ch reciever and transmitter required Make sure to watch the flight video as well as the assembly video. Flight - https://youtu.be/3xQ2jDxW65s Assembly - https://youtu.be/STaBoxW82VE Legal Disclaimer By purchasing and downloading these STL files, you acknowledge and agree to the following terms: Use at Your Own Risk: The files provided are for personal use only. The construction and operation of radio control airplanes involve risks, including but not limited to physical injury, property damage, and financial loss. You assume all responsibility for any consequences resulting from the use of these files. No Warranty: The STL files are provided "as is" without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose, and non-infringement. The creator and seller make no warranty that the files are free of defects or will meet your requirements. Limitation of Liability: In no event shall the creator or seller be liable for any special, direct…