Snapmaker 2.0 A350 Snap-In Quick Change CNC Bed Adapters

Description

This is a digital download STL file to print your own quick-change CNC bed adapters. These are designed to be printed from the Snapmaker itself then attach to the CNC bed plates using 14 M4x8 hex screws which screw directly into the plastic (do not overtighten). I designed these adapters so fit very snug and 'snap' into place to avoid any movement which may ruin a laser etch/cut. Because of this, the tolerances are tight and may need sanding/filing in places to get it to snap in fully. I personally did not have to touch the prints, but I realize we are limited by Snapmaker's tolerances and actual print results. Once printed, simply place the back on first, slide it into place so the build plate goes into the slots, then press the front into place as seen in the video https://youtu.be/a4sEQZLe_lg