Unicorn Table Lamp

Description

Unicorn lamp with a the last unicorn lithophane shade. Model is sliced up for a 120mm square bed. Parts needed and rough assembly instructions: NOTE: you need some rough knowledge of wiring for this project but it is not that complex make sure to consult the instructions with your components and follow all rules for your area. I am not an electrician and any work with electricity should be done carefully and is done at your own risk. Approx. 6.5 inch long threaded lamp pipe/rod with appropriately sized lamp nut (1) and a large washer Keyless Phenolic lamp socket (https://www.amazon.ca/Lamp-Keyless-Phenolic-Socket-threaded/dp/B01LX1NI1O/ref=sr126?dchild=1&gclid=Cj0KCQjwufn8BRCwARIsAKzP6978j3it9iPc7JbTNVmBWjtqPbn8sU0MrTDWS6YAFOGVkmn8velBhUaAm-JEALwwcB&hvadid=325574020008&hvdev=c&hvlocphy=9001346&hvnetw=g&hvqmt=e&hvrand=8460618675323017914&hvtargid=kwd-304594687862&hydadcr=1740110229191&keywords=phenolic+socket&qid=1604282383&sr=8-26&tag=googcana-20) Push button singe circuit switch (https://www.amazon.ca/Creative-Hobbies-Switches-Circuit-Stripped/dp/B00T6I8TTG/ref=sr1_9?dchild=1&keywords=lamp+push+switch&qid=1603492970&sr=8-9) Lamp cord Weights for base, lots of things work, just think heavy not flammable and small enough to fit in the hollows of the base LED bulb (must be LED to reduce heat output and prevent damage to the plastic) Print each piece and 4 copies of unicorn border. I have included the base sliced and whole depending on your bed size. The unsliced version will…