Test Prints U3E
- 12 views
This model is hosted on Cults3D. Files, images and license details belong to the original creator.
View on Cults3D ↗Description
Some simple printer-files to test the behave of your printer - 30mmcube$$$.stl A 30x30x30 mm cube, which has a number on the top. $$$ -> 010 can be used for a print with a nozzle of 0.1 mm $$$ -> 025 can be used for a print with a nozzle of 0.25 mm $$$ -> 040 can be used for a print with a nozzle of 0.4 mm $$$ -> 080 can be used for a print with a nozzle of 0.8 mm $$$ -> 100 can be used for a print with a nozzle of 1.0 mm 30mmcube4Level.stl A cube which can be used to check the behave how good the printer is doing the corner of cubs, when the cube decrease to 1/8 of the ground. The ground cube starts by 30x30x30 mm
About this model
Test Prints U3E is a free 3D model in the Other category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
