iPad Tripod Support for TikTok Kids

Description

This is the iPad version of my Foldable Camera Tripod Accessories (https://www.thingiverse.com/thing:4230858). I designed this for my TikTok Kids in this time of #COVID19. It can be attached to a standard tripod or my Foldable Camera Tripod Remix (https://www.thingiverse.com/thing:4213462). If you choose the printed one with the 100mm legs I highly recommend you print the 100m 40 degrees legs supplied . It fits the currents iPad both portrait and landscape mode and iPad Mini in portrait mode. I made it for a 12mm thick iPad with its protective case. If you don't have a protective case, I highly recommend you to put some high-friction pad like this one : https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/101914-high-friction-sheets. There is nothing preventing the iPad to slide out of the support from side to side! Parts required one ¼-20 x 1½" hex bolt (can be substituted) one ¼-20 nut one ¼-20 Hex Coupling Nut, Fully Threaded one M4x25 screw one M4 nut The hex bolt can be substituted with a ¼-20 x 2" bolt and a ¼-20 nylon lock nut. See picture. Printing All the parts should be printed the way they are oriented. Base: Support everywhere but a support blocker must be added. You don't need (and want) any support inside! In Cura, with the part placed at (0,0,0), add a 10x144x35 blocker at (-6, -18.4, 0). This should block the inside only and leave the oval hole supported. Arms, Swivel Base & Thumb Nuts: support everywhere Assembly The folding…