Flatbed trailer 2-PTS-4

Description

The model is made in 1/18 scale. The drawbar is fully movable, all sides open, the body rises, the rotary part works. Demonstration of the work: https://www.youtube.com/watch?v=x_FkSSaNO4w The archive contains files for printing ordinary TPU tires and molds for making silicone tires. Brief instructions. To make the tires, you will need two-component platinum-based silicone (30 Shore units), dye, and a hard brush. Components A and B are mixed in equal proportions, and the amount of dye is added according to individual requirements. Everything is thoroughly mixed for about 5 minutes. We put the finished mass into the mold with a stiff brush to remove all the air from the baking dish. If PET-G is used to make molds, then due to its smooth surface, you can do without a separator. The trailer fits all my RC models. To build it, you will need: -4 mr 105 bearings -metal axes with a diameter of 5mm -aluminum wire with a diameter of 2 mm -6v excavator cylinder (with electric gear motor N20)