FIDGET GUN - EDC - Toy - Stress - ASMR

Description

Seen this fidget toy everywhere but couldn't find a good STL for one so here we go! Consists of 7 pcs. You will need one PEN SPRING, 10 MAGNETS (6mm x 2mm) and C.A. Glue. The hinge is joined with a piece of 1.75 mm filament. Assembly is pretty straight forward. It all should fit together. I printed this on my Creality K1 Max which provides tighter tolerances . Sand paper is your friend. Make sure to work in the parts a bit to get them sliding smoothly. Also if needed I can make adjustments. My original file. Obviously not my creation. Just sharing. Quick Assembly: *Pick one side of the body, place SLIDER in top grove of body. *Install SPRING in slot *Install RING *Carefully apply some CA glue on the inside wall of the lower body to join them. Make sure not to get it in the RING area *Install 10 MAGNETS - Use CA if needed *Install the BRIDGE - Use a piece of filament to complete the hinge (It will be a little tight - cut flush) *Slide TOP into the grove of the BRIDGE - Work it back & forth to make it slide smooth *Install WEDGE in front of TOP piece with CA Link to MAGNETS on Amazon. ( https://www.amazon.com/dp/B09XK9ZMVQ?ref=ppxyo2ovdtbfedasintitle&th=1 ) Actual size of magnets is 6mm x 1.75mm A quick LIKE would be awesome!