BIRDFEEDER - COMPATIBLE WITH BLINK 3 & 4 CAMERAS

Description

***NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. COMMERCIAL LICENSE ON MY PATREON. FULLACCESS AS SOON AS YOU JOIN, MULTI PARTS DESIGNS SO NO NEED FOR A MULTICOLOR PRINTER AND MOST OF THE PROJECTS ARE SUPPORT FREE!!! LINK TO PATREON: https://www.patreon.com/PA1_MAKER*** Spring is here and tonight, I'm presenting to you the very first bird feeder in my collection compatible with Amazon's Blink cameras (3 & 4). I've been asked this quite a few times, so I thought I'd give it a try!!! 😊 BUT DON'T WORRY; If you don't have a Blink camera, a version of the birdfeeder without a camera is also included in the files! So, fun for everyone, without exception! This is intended as a first test, to evaluate and define the outline of future feeders.Many constraints were encountered, particularly in securing the feeder without hindering access to the camera. From this emerged the new feeder mount that you'll discover with this model. The project is very simple, with only a few parts, all very easy to print. The tray is removable for cleaning/filling, and some drainage holes are located at the bottom to prevent any water accumulation. Only one part requires a small support, and that's the mounting bracket (for the bottom hole which is countersunk). So use the "supports on buildplate only" function. Assembly is ultra-fast. However, you will need the following hardware: (7x) M3x10mm self-tapping screws. Here's what I used: https://a.co/d/bkWPMGB Apart from that, a little glue will be required, but…