Luke Skywalker Collapsing Lightsaber (No CFS)by Punglo

Description

DescriptionLuke Skywalker Collapsing Lightsaber 0,4mm nozzle, 0,16mm layer, 2 walls, 15% infillDesigned for printing without CFS. All parts are printed separately and glued together after printing.A magnet (6x3mm) is inserted into the bottom of the hilt, with a programmed pause in the print for its placement. This makes the hilt compatible with the magnetic version of the collapsing blade. The blade stays securely in place even when the hilt is upside down.Pay attention to the magnet’s polarity to ensure compatibility with the blade.Universal Lightsaber Collapsing BladeTelescopic retractable blade designed for my lightsaber models.The print profile is set to vase mode with a 0.9 mm wall thickness.Note for printing Plate 4:Plate 4 is intended for manual colour change without CFS.(or, if using a CFS, set the desired color without pausing).Start the print with black filament loaded.During the programmed pause, change the filament to gold.After the change, resume the print.