K2 Plus Drawer Base - Large

Description

Update July 17 2026 - I added an optional drawer face and handle to the project. The handle matches the handle on the K2 Plus exactly. The handle is printed separately to allow for easier color coordination. You will need two m3x6mm flathead screws to attach the handle to the faceplate. This faceplate attaches to the drawer exactly the same as the original, so you won't have to reprint the drawer.----------------------------Update - I made a mistake with the original upload. The files "Base - Front Right Side" and "Base - Rear Left Corner" had the incorrect recesses in them, which would cause the printer to be on a teeter-totter. The replacement pieces are named "Base - Front Right Side v1.1" and "Base - Rear Left Corner v1.1". I will also redo the 3mf file in the next few hours, as well.My apologies for this mistake.------------------------------I've had multiple requests for a larger version of my existing K2 Plus Drawer Base, so here it is (finally). This model is the exact same footprint, with the same stackable feet, as my existing K2 Plus bases, so all you have to do is add it to your existing stack.There is a single large drawer which will utilize the entire build plates surface of the K2 Plus to print. There are 2 drawer styles available for you to choose from - Plain or Gridfinity. The Gridfinity layout is 8x-8y-16u. The overall height of the Drawer Base is 140mm. The width and depth of the entire base match that of the K2 Plus. For those of you that…