Super Mario keychain - Question

Description

I made a Super Mario - Question keychain with an anti-stress button. I added a 3MF file for multicolor printing and STL files for single color printing. You can make the STL file in two colors. For this model you will need keyboard buttons, you can use buttons from an old keyboard or buy buttons from your nearest store or online stores. Also you need to buy a ring for key rings, you can get a ring from old key rings or buy it in the nearest store. Assembly of the model is not difficult, you just need to install the button inside the keyring, fix it, put the cover on and fix it, you can also use super glue for a secure fixation ( some types of plastic shrinkage is higher, so the button can not hold well and fall out ) If you don't have an AMS for multi-color printing, you can print the block in yellow, the question marks in white and glue them on with super glue or just print the whole model in one color for this I added a whole model that doesn't need to be assembled. The model is ready to print and requires no supports.________________________________________________________ Don't forget to share your prints ________________________________________________________ If you have any problems, please email me ________________________________________________________ All my models are for personal use only ________________________________________________________ Don't forget to subscribe to me ________________________________________________________ All of my…