BeQuiet Wind Sim

Description

Updated 3mf to include better mounting solution for 8040 (or 1530) uprights to reduce hardware requirements and improve fan stability.Includes left and right hand housings for a PWM fan, case with openings for all necessary wiring along with mounting points spaced for the bottom of an Asetek La Prima wheel but will mount to any 8020 type of extrusion or similar. Also includes gopro style mounting designed for an M5x14mm screw and M5 press in threaded insert. Arduino case is sized to fit the R3 board on the pins in the bottom half of case, plus a motor shield on top - however I did not use a motor shield, PWM fan control is better than the way shown in the boosted media video if you prefer silent operation and slightly easier wiring.Full materials list to create yourself for roughly $60 depending on what you have around:3D print the full kit (PLA would work well, i used Sunlu PLA+ 2.0 for fan housings/8020 mounts & PETG for the arduino case.4 pcs T-Nuts -> $12 adaptors included in kit are for amazon 240pcs M5 t-nut kit, but any t-nut that fits your profile will work https://www.amazon.com/dp/B0DMCS8KW4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_26 pcs screws -> M5x14mm screws from same amazon kit as t-nuts1 pcs ****** Uno R3 -> $17 https://www.amazon.com/dp/B01EWOE0UU?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_12 pcs 120mm PWM PC Fan -> $33 for be quiet! 120mm pure wings 3 (2 pack) fans https://www.amazon.com/dp/B0FV3B5K8B?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3or…